How to Start Welding at Home | Beginner Shop Guide
The sparks bounced off the floor, the arc wandered, and the bead looked nothing like what I’d seen in videos. […]
How to Start Welding at Home | Beginner Shop Guide Read Post »
How to Weld at Home Without a Welder | DIY Guide
The bracket broke and there was no welder in sight — just a garage, a few basic tools, and a
How to Weld at Home Without a Welder | DIY Guide Read Post »
How to Weld Thin Metal Without Burning Through
The puddle went shiny and soft in a split second, and before I could move the torch, the edge disappeared.
How to Weld Thin Metal Without Burning Through Read Post »
How to Determine Proper Weld Size | Practical Guide
The bead looked big and strong, but when the part was put under load, it cracked right along the joint.
How to Determine Proper Weld Size | Practical Guide Read Post »
Aluminum MIG Welding Wire Speed and Voltage Chart
The wire kept bird-nesting, the arc felt jumpy, and the bead looked like it was sitting on top instead of
Aluminum MIG Welding Wire Speed and Voltage Chart Read Post »
MIG Welding Exhaust Pipe Settings | Practical Guide
The puddle went liquid way too fast, and before I could react, the edge of the pipe dropped out. Thin
MIG Welding Exhaust Pipe Settings | Practical Guide Read Post »
Pulse MIG Welding Settings | Practical Shop Guide
The arc sounded smoother, almost like it was breathing, and the puddle stayed tight instead of splashing everywhere. I wasn’t
Pulse MIG Welding Settings | Practical Shop Guide Read Post »
How to Weld Stainless Steel at Home | Safe Guide
The arc looked clean, but the metal around the bead turned dark and crusty faster than I expected. Stainless steel
How to Weld Stainless Steel at Home | Safe Guide Read Post »
Stick Welder Settings Chart: Amps, Rods, and Technique
The rod started sticking, the arc went wild, and the bead piled up like it didn’t know where to go.
Stick Welder Settings Chart: Amps, Rods, and Technique Read Post »
How to Prevent Burn Through When Stick Welding
The arc flared, the edge sagged, and suddenly there was a hole where solid metal was supposed to be. I
How to Prevent Burn Through When Stick Welding Read Post »
Stick Welding Amperage Metal Thickness | A Welder’s Guide
The rod kept sticking, the arc felt weak, and the bead just piled up instead of biting into the metal.
Stick Welding Amperage Metal Thickness | A Welder’s Guide Read Post »
TIG Welding Amps to Metal Thickness Chart | Guide
The arc kept washing out the edges of the joint, even though my torch angle felt right. I backed off
TIG Welding Amps to Metal Thickness Chart | Guide Read Post »
Plasma Welding Advantages and Disadvantages
First time I ran a plasma arc, the control caught me off guard — tight arc, intense heat, and almost
Plasma Welding Advantages and Disadvantages Read Post »
What Is Butt Welding? Simple Explanation & Shop Guide
Butt welding is when you join two pieces of metal edge to edge in the same plane, instead of overlapping
What Is Butt Welding? Simple Explanation & Shop Guide Read Post »
How to Repair Rusted Metal with Holes
Rust holes have a way of revealing themselves at the worst time — you start grinding what looks like a
How to Repair Rusted Metal with Holes Read Post »